Products:
Information:
Servo's & Controllers
Quantity:
Perfect for Animatronics Full SD84 Documentation All 84 channels can be your choice of Logic input, Logic output, or Servo output, Additionally 36 of the channels can be analogue inputs with 10-bit resolution. A PC application, with full source code, is freely available to allow you to quickly evaluate the SD84's capabilities.Servo Channels - Up to 84 Logic Outputs - Up to 84 Logic Inputs - Up to 84 10-bit Analogue Inputs - Up to 36 Servo Refresh Rate - 20mS under all conditions Position Control - Directly programmed in uS Speed Control - From maximum down to 20 seconds for full rotation Servo Power - Separate terminals for voltage of your choice in groups of 8 servo's Logic Power - Direct from the USB Bus Control interface - USB
Full SD21 Documentation The SD21 is a 21 channel servo controller module. It will drive up to 21 RC servo's and maintain a 20mS refresh rate, regardless of the number of servo's used or their positions (pulse widths). It will control both position and speed of the servo's.
Full SD20 Documentation A pre-programmed PIC16F872 driving up to 20 standard RC servo's via the I2C bus. Supplied complete with 8MHz, 3 terminal ceramic resonator.
Amazingly powerful for such an unbelievably low price, The PICAXE-18X will fit on the SD21 module. Programmed in Basic. Technical data and the free editor is available directly from the PicAxe website.
Universal Pan Tilt Bracket for all Sonar and Infrared Rangers. Kit includes two brackets with slightly different drill patterns, a servo mounting bracket and fixing hardware. Servo's are not included in the kit and should be ordered separately. Our miniature servo below is ideal for the Tilt. Either the standard or miniature servo can be used for Pan.
Miniature Servo. Ideal for the Pan & Tilt bracket above.Operating Voltage: 4.8-6.0 VoltsOperating Speed : 0.12sec/60 degrees at no loadStall Torque (4.8V): 1.5kg.cmBearing Type: Plastic BearingGear Type: All Nylon GearsConnector Wire Length: 170mmDimensions: 23 x 12.3 x 25.6mmWeight: 9g
Standard size servo, equivalent to S3003. Can be used as the Pan servo (not tilt) on the Pan & Tilt Bracket above. Operating Voltage: 4.8-6.0 VoltsOperating Speed : 0.15sec/60 degrees at no loadStall Torque (4.8V): 3.5kg.cmBearing Type: Plastic BearingGear Type: All Nylon GearsConnector Wire Length: 275mmDimensions: 40.6 x 20 x 38mmWeight: 38g
Very low cost servo based drive system.The SW01 drive kit comprises two standard servo's, factory modified for continuous rotation and two wheels.
Perfect for powering Servo'sVoltage - 7.2 volts Capacity - 3300mA/H Type - NI-MH Size - 136mm x 45mm x 24mm Weight - 387g
;
