Products:
Information:
Relay Modules
Quantity:
Controlled from over Ethernet using simple TCP/IP commands. Full ETH-RLY02 Documentation Number of Relay's - 2Power - 12V DC adaptor, supplied separately.Control interface - HTTP (webpage) or TCP/IP over Ethernet. Relay current - Up to 16Amp @24vdc or 250vac Connections - Screw Terminals for N/O N/C and Common contacts. Free Android and iPhone Apps are available to remotely control this module.
Controlled from over Ethernet using simple TCP/IP commands. Full ETH-RLY16 Documentation Number of Relay's - 8 Power - 12V DC adaptor, supplied separately.Control interface - HTTP (webpage) or TCP/IP over Ethernet. Relay current - Up to 16Amp @24vdc or 250vac Connections - Screw Terminals for N/O N/C and Common contacts. Free Android and iPhone Apps are available to remotely control this module.
Powered and Controlled from the USB bus.Similar to our popular USB-RLY16 module, the USB-RLY16L uses latching relays and is completely powered from a standard USB bus. No separate power supply is needed. Full USB-RLY16L Documentation Number of Relay's - 8 Power - Powered from standard USB bus Control interface - USB Relay current - Up to 16Amp @24vdc or 250vac Connections - Screw Terminals for Position 0, Position 1 and Common contacts.
Controlled from the USB bus. Full USB-RLY16 Documentation Number of Relay's - 8 Power - 12V DC adaptor, supplied separately.Control interface - USB Relay current - Up to 16Amp @24vdc or 250vac Connections - Screw Terminals for N/O N/C and Common contacts.
Autonomous operation from direct sensor input. Full SCR02 Documentation Free configuration utility to setup the SCR02 sensor type and operating mode.0-5v analogue inputs or direct connection to ultrasonic rangers.Number of Relay's - 2Power - 12V DC supplied separately.Configuration interface - USB MiniRelay current - Up to 16Amp @24vdc or 250vac Connections - Screw Terminals for N/O N/C and Common contacts.
Controlled from the USB bus. Full USB-OPTO-RLY816 Documentation Number of Isolated Inputs - 8Input Voltage - 4.5v DC to 27v DCNumber of Relay's - 8 Power - 12V DC adaptor, supplied separately.Control interface - USB Relay current - Up to 16Amp @24vdc or 250vac Connections - Screw Terminals for N/O N/C and Common contacts.
Powered & Controlled from the USB bus. Full USB-OPTO-RLY88 Documentation Number of Isolated Inputs - 8Number of Relay Ouput's - 8 Power - Powered from standard USB busControl interface - USB Input Voltage - 4.5v DC to 27v DCRelay current - Up to 1Amp @30vdc or 60vac. 500mA@110vac. 250mA@250vac Connections - Screw Terminals for N/O, N/C, Common contacts and +/- Inputs.
Powered and Controlled from the USB bus. Full USB-RLY02 Documentation Number of Relay's - 2Power - Powered from standard USB bus Control interface - USB Relay current - Up to 16Amp @24vdc or 250vac Connections - Screw Terminals for N/O N/C and Common contacts.
Powered and Controlled from the USB bus. Full USB-RLY08-B Documentation Number of Relay's - 8 Power - Powered from standard USB bus Control interface - USB Relay current - Up to 1Amp @30vdc or 60vac. 500mA@110vac. 250mA@250vac Connections - Screw Terminals for N/O N/C and Common contacts.The USB-RLY08-B is an update of the USB-RLY08 below. It uses a different USB driver, otherwise is a drop in replacement.
Powered and Controlled from the USB bus. Full USB-RLY08 Documentation Number of Relay's - 8 Power - Powered from standard USB bus Control interface - USB Relay current - Up to 1Amp @30vdc or 60vac. 500mA@110vac. 250mA@250vac Connections - Screw Terminals for N/O N/C and Common contacts.Not recommended for new designs, please consider the USB-RLY08-B above.
Serial or I2C control. Full RLY08 Documentation The RLY08 provides eight volt free contact relay outputs with a current rating of up to 1Amp each. It requires a 5v supply and has an exceptionally low maximum current consumption of approx. 100mA with all relays on. The relays are SPCO (Single Pole Change Over) types. Number of Relay's - 8 Power - 5v @ 100mA max. Control interface - Serial or I2C Relay current - Up to 1Amp @30vdc or 60vac. 500mA@110vac. 250mA@250vac Connections - Screw Terminals for N/O N/C and Common contacts. Expansion - Up to 8 modules on Serial or I2C bus
;
