Products:
Information:
DMX512
Quantity:
Full Technical Documentaion DMX512, 8-channel Digital Output Module.Fully compliant with the latest USITT DMX512-A standard.Backwards compatible with the older USITT DMX512/1990 standard.Easy to use configuration via a USB port. PC application supplied, no dip switches to worry about.Uses a single 9v DC supply for power, or 9v AC if dimmer control required .Module can be set to any DMX base address from 1-505 .Output ranges may be individually set to be Dimmer or Servo or Digital.DMX feed though on all pins, including 4 & 5.Selectable 120 Ohm termination.
Full Technical documentation DMX512, 8-channel Analogue Output Module.Fully compliant with the latest USITT DMX512-A standard.Backwards compatible with the older USITT DMX512/1990 standard.Easy to use configuration via a USB port. PC application supplied, no dip switches to worry about.Uses a single 18VAC supply for power.Module can be set to any DMX base address from 1-505 .Output ranges may be individually set from 0 to +/- 5v, up to 0 to +/-15vDMX feed though on all pins, including 4 & 5.Selectable 120 Ohm termination.
Full Technical documentation Photo shows 4 Relay, 4 Dimmer OptionFeaturesFully compliant with the latest USITT DMX512-A standard.Backwards compatible with the older USITT DMX512/1990 standard.Easy to use configuration via a USB port. PC application supplied, no dip switches to worry about.Uses a single 9V AC or 12V DC supply for power.Module can be set to any DMX address from 1-505.Mechanical Relays up to 250VAC 8Amp.Solid State Relays for phase controlled Dimming, Up to 250VAC 5Amp. DMX feed though on all pins, including 4 & 5.Selectable 120 Ohm termination.
Full Technical documentationTop Quality 4-Way DMX SplitterIf you have more than 32 devices on your DMX cable, you need to provide a Splitter/Buffer to maintain the DMX signal quality. This 4 Way Optically Isolated DMX splitter/buffer will allow a total 128 down stream devices to be connected, 32 on each output. The DMX-SPLIT4 can be cascaded for even more devices up to 512.Single 9v-12v DC power supply required.Robust, Truss mountable, Steel Case.
Low cost DMX512 TransmitterCombining the USB-RS485 module with our DMX Generator software, this is the lowest cost route to generating DMX512 that we know of.Hardware documentation for the USB-RS485 module is here.The DMX Generator allows our USB-RS485 to control lighting scenes using a DMX512 data stream. Six pages of twelve sub-masters alow up to sixty scenes to be recorded and played back. Any number of named shows may be saved on disc.The DMX Generator documentation is here, and is available as a Free Download.
;
