Online CatalogueuCAM Ultrasonic Rangers USB to I2C Interfaces Ultrasonic Rangers Robot Drive System 
 Home Contact Terms & Conds Search View Cart Checkout ;Login

Controller Chips

Controller Chips

GPIO14 - I2C bus to 14 general purpose I/O lines.
GPIO14 - I2C bus to 14 general purpose I/O lines.

GPIO14 - I2C bus to 14 general purpose I/O lines.


Price: 5.99 (Excluding VAT at 20%)

Quantity:

Full GPIO14 Documentation


The ideal chip for adding general purpose I/O lines to the RF04/CM02, USB-I2C or any I2C based application.

Features.
Ideal for adding general purpose I/O lines to the RF04/CM02 or USB-I2C.
Up to 2 SRF04's or 2 SRF05's controlled, including all timing.
Up to 14 general purpose Input/Output lines.
Up to 5 Analogue input channels with 10-bit A/D conversion.
1 PWM output usable as an 8-bit D/A with a simple filter.
I2C address 0x40, can be changed to allow up to 8 devices on the same I2C bus.
6 I/O lines have programmable pull-up resistors built into the chip .
Individual control of each pin for Input or Output.
Simple commands for Bit Set, Bit Clear and Bit Toggle.
Easy I2C bus control, similar protocol as popular EEPROM's such as 24C02.


SD20 - 20 Channel RC Servo Driver
SD20 - 20 Channel RC Servo Driver

SD20 - 20 Channel RC Servo Driver


Price: 6.50 (Excluding VAT at 20%)

Quantity:

Full SD20 Documentation


A pre-programmed PIC16F872 driving up to 20 standard RC servo's via the I2C bus. Supplied complete with 8MHz, 3 terminal ceramic resonator.


Controller Chips